CANON IP3000 AND 5 YELLOW BLINKS PRO
CANON IP3000 AND 5 YELLOW BLINKS CODE
CANON IP3000 AND 5 YELLOW BLINKS SERIES

Pull down the tape to remove the protective material.Д¬lose the cover after removing the protective material. If you find the protective material or the tape remains attached, retract the output tray extension and the paper output tray to remove the protective material or the tape. Make sure that the protective material or the tape does not remain attached to the FINE cartridge holder. The protective material for the FINE cartridge holder or the tape may remain attached to the holder. Press the machine's Black or Color button to continue printing. When you need to replace a FINE cartridge, follow the procedure below. If you want to cancel printing, press the machine's Stop button. Printing cannot be executed because the ink cartridge is not compatible with this machine. Contact the service center.ДЄppropriate ink cartridge is not installed. If the error is not resolved, the FINE cartridge may be damaged. Do not perform any other operations until the machine completes the cleaning of the print head. When print head alignment is performed, the machine starts cleaning the print head automatically before printing the print head alignment sheet. The FINE cartridge holder moves to the replacement position. Retract the paper output tray and the output tray extension. When ink runs out, replace the FINE cartridge immediately with a new one.ДЎ.

Color ink may be consumed even when printing a black-and-white document or when black-and-white printing is specified.Д«oth color ink and black ink are also consumed in the standard cleaning and deep cleaning of the print head, which may be necessary to maintain the performance of the machine.

If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print. We recommend to use a new FINE cartridge in order to obtain optimum qualities.Д®ven when printing with one ink only, print with leaving the empty FINE cartridge installed. However the print quality may be reduced compared to when printing with both cartridges.

If a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever ink remains, only for a while.

Number of flashes = Other cases than above.

CANON IP3000 AND 5 YELLOW BLINKS CODE

Number of flashes = 10 flashes / Support Code = B201, B202, B203, B204 Number of flashes = 7 flashes / Support Code = 5B00, 5B01 Number of flashes = 2 flashes / Support Code = 5100 Number of flashes = 16 flashes / Support Code = 1688 Number of flashes = 15 flashes / Support Code = 1682 Number of flashes = 14 flashes / Support Code = 1684 Number of flashes = 13 flashes / Support Code = 1686 Number of flashes = 9 flashes / Support Code = 1890 Number of flashes = 8 flashes / Support Code = 1700, 1701 Number of flashes = 5 flashes / Support Code = 1485 Number of flashes = 5 flashes / Support Code = 1403 Number of flashes = 5 flashes / Support Code = 1401 Number of flashes = 4 flashes / Support Code = 168A Number of flashes = 3 flashes / Support Code = 1300 Use Canon consumables to ensure optimum performance and superb quality with every print.

CANON IP3000 AND 5 YELLOW BLINKS PRO

Take complete creative control of your images with PIXMA and imagePROGRAF PRO professional photo printers.

CANON IP3000 AND 5 YELLOW BLINKS SERIES

Get productive with a range of small office printers that are your ideal companions.Д®njoy high quality performance, low cost prints and ultimate convenience with the PIXMA G series of refillable ink tank printers. If the flashing continues, then the battery may need to be replaced.Functional and stylish home photo printers and all-in-ones delivering quality results. Afterwards, try charging the battery again. Remove the battery from the charger and then use a dry cloth or cotton swap to clean the metal contact terminals on the battery. The slow flash should stop after a short while or after the temperature returns to a suitable range between 50вЏ and 86вЏ (10вЊ and 30вЊ).ДЇast flashing indicates a poor connection between the battery and charger or a problem with the battery pack. Slow flashing occurs if the battery has not been charged for a long time or if the environmental temperature is not suitable for charging the battery.

The CHARGE lamp may flash fast (multiple times a second) or slow (around 1.5 second intervals), depending on the cause. There is a problem with the battery pack.There is a poor connection between the battery and charger.The battery pack has not been used for a long time.

The environmental temperature is too cold to charge the battery pack.

The CHARGE light may flash for the following reasons:

Canon ip3000 and 5 yellow blinks